# text: "Sorry, ZipIt was unable to open that file. Are you sure it is a valid zip archive? Make sure that you transferred the file using binary mode, not text."
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=77 x2=329 y2=124
# text: "Also, if this is one part of a multi-segment archive, you must open the final segment in order for ZipIt to read the archive."
# item 3: TEXT (0x88) disabled
# bounds: x1=14 y1=133 x2=330 y2=166
# text: "Please consult the “Troubleshooting” section in the documentation for more information."
DITL_129.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "^0"
DITL_130.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=110 x2=208 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=310 y2=104
# text: "Sorry, the following error occured:\n^0\nError code = ^1"
DITL_131.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=89 y1=75 x2=147 y2=95
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=238 y1=75 x2=296 y2=95
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=14 x2=311 y2=60
# text: "^0"
DITL_132.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "Sorry, you cannot change the compression of an item already saved. Uncompress it and then recompress it if necessary."
DITL_133.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=100 x2=338 y2=120
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=30 y1=100 x2=88 y2=120
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=5 y1=3 x2=256 y2=36
# text: "^0"
# item 3: TEXT (0x88) disabled
# bounds: x1=20 y1=37 x2=371 y2=54
# text: "Rename ^1 as:"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=60 x2=373 y2=76
# text: ""
# item 5: BUTTON (0x04) enabled
# bounds: x1=133 y1=98 x2=208 y2=118
# text: "Cancel All"
# item 6: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010085
DITL_134.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=63 x2=392 y2=83
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=223 y1=63 x2=301 y2=83
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=78 y1=62 x2=156 y2=82
# text: "Don’t save"
# item 3: ICON (0xA0) disabled
# bounds: x1=23 y1=13 x2=55 y2=45
# ICON resource ID: 2
# item 4: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=393 y2=49
# text: "Save changes to the zip file “^0” before closing?"
DITL_135.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=360 y1=220 x2=418 y2=240
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=70 y1=220 x2=128 y2=240
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=20 y1=10 x2=443 y2=30
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=6 y1=41 x2=487 y2=212
# text: ""
DITL_136.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=357 y1=142 x2=415 y2=162
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=57 y1=142 x2=115 y2=162
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=10 y1=10 x2=435 y2=30
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=40 x2=462 y2=127
# text: ""
DITL_137.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=324 y1=261 x2=382 y2=281
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=64 y1=261 x2=122 y2=281
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=10 x2=436 y2=30
# text: "Do not put up notification dialog boxes while in background"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=31 x2=358 y2=51
# text: "Open an untitled window when first starting up"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=73 x2=371 y2=93
# text: "By default, smart-strip linefeeds from text files"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=273 y1=200 x2=314 y2=217
# text: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=273 y1=220 x2=314 y2=237
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=273 y1=240 x2=314 y2=257
# text: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=133 y1=200 x2=242 y2=219
# text: "Binary file type:"
# item 9: TEXT (0x88) disabled
# bounds: x1=133 y1=220 x2=261 y2=238
# text: "Binary file creator:"
# item 10: TEXT (0x88) disabled
# bounds: x1=133 y1=240 x2=248 y2=256
# text: "Text file creator:"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=52 x2=316 y2=72
# text: "Always replace existing files; do not ask"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=94 x2=217 y2=114
# text: "Allow duplicate filenames"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=115 x2=359 y2=133
# text: "Convert all filenames to PC-compatible format"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=136 x2=239 y2=154
# text: "Enable zoom rectangles"
# item 15: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010089
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=156 x2=263 y2=174
# text: "Follow aliases when adding files"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=176 x2=301 y2=194
# text: "Rename floppy disks when segmenting"
DITL_138.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=110 x2=208 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=310 y2=102
# text: "Error occured while zipping:\n^0\n^1\nError code: ^2"
DITL_139.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=294 y1=273 x2=370 y2=293
# text: "Register"
# item 1: BUTTON (0x04) enabled
# bounds: x1=134 y1=273 x2=268 y2=294
# text: "Print Order Form…"
# item 2: BUTTON (0x04) enabled
# bounds: x1=34 y1=273 x2=105 y2=293
# text: "Not yet"
# item 3: PICTURE (0xC0) disabled
# bounds: x1=1 y1=6 x2=401 y2=163
# PICT resource ID: 130
# item 4: TEXT (0x88) disabled
# bounds: x1=13 y1=200 x2=88 y2=216
# text: "Name:"
# item 5: TEXT (0x88) disabled
# bounds: x1=13 y1=245 x2=88 y2=261
# text: "Password:"
# item 6: EDIT_TEXT (0x90) disabled
# bounds: x1=111 y1=200 x2=273 y2=217
# text: ""
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=111 y1=224 x2=273 y2=241
# text: ""
# item 8: EDIT_TEXT (0x90) disabled
# bounds: x1=111 y1=248 x2=273 y2=265
# text: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=13 y1=222 x2=106 y2=238
# text: "Organization:"
# item 10: TEXT (0x88) disabled
# bounds: x1=13 y1=177 x2=102 y2=193
# text: "SoftLock ID:"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=108 y1=172 x2=200 y2=195
# data: ""
# item 12: TEXT (0x88) disabled
# bounds: x1=205 y1=173 x2=286 y2=189
# text: "Product #:"
# item 13: TEXT (0x88) disabled
# bounds: x1=283 y1=173 x2=400 y2=211
# text: "30021 (USA)\n30022 (overseas)"
DITL_140.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=140 x2=238 y2=160
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=140 x2=78 y2=160
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=20 y1=10 x2=333 y2=28
# text: "Please enter a password for ^0:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=40 x2=238 y2=58
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=20 y1=70 x2=335 y2=87
# text: "Please reenter your password for verification:"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=100 x2=238 y2=118
# text: ""
DITL_141.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=80 x2=288 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=80 x2=78 y2=100
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=329 y2=28
# text: "Please enter the password for ^0:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=40 x2=313 y2=57
# text: ""
DITL_142.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=240 y1=200 x2=298 y2=220
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=60 y1=200 x2=118 y2=220
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=31 y1=20 x2=148 y2=41
# text: "Archive file type:"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=20 x2=314 y2=39
# text: "ZIP (recommended)"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=40 x2=206 y2=58
# text: "TEXT"
# item 5: TEXT (0x88) disabled
# bounds: x1=44 y1=70 x2=148 y2=88
# text: "Use MacBinary:"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=70 x2=256 y2=88
# text: "Always"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=90 x2=256 y2=108
# text: "When needed"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=110 x2=256 y2=128
# text: "Never"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=142 x2=292 y2=160
# text: "Deflation (better)"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=162 x2=364 y2=180
# text: "Implosion (more compatible)"
# item 11: TEXT (0x88) disabled
# bounds: x1=6 y1=142 x2=148 y2=163
# text: "Default compression:"
# item 12: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001008E
DITL_143.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=21 y1=91 x2=79 y2=111
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=112 y1=91 x2=170 y2=111
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=160 y2=32
# text: "Name of new folder:"
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=14 y1=42 x2=164 y2=58
# text: ""
DITL_144.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=180 x2=318 y2=200
# text: "Add"
# item 1: BUTTON (0x04) enabled
# bounds: x1=375 y1=180 x2=433 y2=200
# text: "Delete"
# item 2: TEXT (0x88) disabled
# bounds: x1=245 y1=14 x2=319 y2=30
# text: "Extension:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=14 x2=382 y2=30
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=259 y1=77 x2=318 y2=93
# text: "Creator:"
# item 5: CUSTOM (0x80) disabled
# bounds: x1=244 y1=130 x2=453 y2=145
# data: ""
# item 6: BUTTON (0x04) enabled
# bounds: x1=275 y1=150 x2=406 y2=170
# text: "Choose example…"
# item 7: CUSTOM (0x00) enabled
# bounds: x1=7 y1=7 x2=235 y2=194
# data: ""
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=45 x2=382 y2=61
# text: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=392 y1=42 x2=412 y2=58
# data: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=252 y1=44 x2=319 y2=61
# text: "File type:"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=76 x2=382 y2=92
# text: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=392 y1=73 x2=412 y2=89
# data: ""
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=262 y1=104 x2=339 y2=121
# text: "Text file"
# item 14: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010090
DITL_145.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "There are too many letters in that field. The extension can have a maximum of three letters, and the file type and creator a maximum of four."
DITL_146.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=21 y1=193 x2=103 y2=213
# text: "Register…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=39 y1=225 x2=176 y2=245
# text: "Print Order Form…"
# item 2: BUTTON (0x04) enabled
# bounds: x1=125 y1=193 x2=183 y2=213
# text: "Not Yet"
# item 3: PICTURE (0xC0) disabled
# bounds: x1=0 y1=0 x2=454 y2=274
# PICT resource ID: 132
DITL_147.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=224 y1=77 x2=290 y2=97
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=140 y1=77 x2=198 y2=97
# text: "Stop"
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=7 x2=295 y2=68
# text: "The file “^0” may not be valid. Please use it with caution."
DITL_148.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=110 x2=198 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=316 y2=100
# text: "ZipIt cannot open the selected file. If this is a multi-segment archive, please open the final segment. Otherwise, you probably need to re-download the archive in binary mode. See the documentation for details."
DITL_149.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=150 x2=208 y2=170
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=340 y2=47
# text: "Sorry, you may not modify existing entries in a multi-segment zip archive."
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=50 x2=338 y2=138
# text: "Instead, use the “Save As…” command to save this archive to your hard disk, then make your changes. You may then use the “Save As…” command again to re-segment the archive."
DITL_150.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=130 y1=160 x2=188 y2=180
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "There is no more space on the selected disk. If you would like to segment the archive, please choose “Set Segment Size” from the Zip menu."
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=100 x2=309 y2=152
# text: "If you have already tried this, you should probably set the segment size to a lower value and try again."
DITL_151.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=154 y1=140 x2=212 y2=160
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=21 y1=140 x2=79 y2=160
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=48 y1=115 x2=96 y2=131
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=100 y1=115 x2=117 y2=129
# text: "K"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=14 x2=267 y2=33
# text: "As large as possible (Mac disks)"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=35 x2=217 y2=53
# text: "High Density (1390K)"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=55 x2=217 y2=73
# text: "DOS double density (650K)"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=75 x2=224 y2=92
# text: "Mac double density (775K)"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=95 x2=217 y2=113
# text: "Mac single sided (385K)"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=115 x2=47 y2=133
# text: ""
DITL_152.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=210 y1=91 x2=268 y2=111
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=35 y1=91 x2=93 y2=111
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=14 y1=14 x2=46 y2=46
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=63 y1=14 x2=285 y2=81
# text: "You must use InternetConfig to modify your extension mapping preferences. Should I launch InternetConfig now?"
DITL_153.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=240 x2=258 y2=260
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=409 y2=58
# text: "Your SoftLock ID has changed, meaning that you have either reformatted your hard disk or switched computers. Your password was based on your SoftLock ID."
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=64 x2=409 y2=102
# text: "You will need to call 1-800-SOFTLOCK or email Thomas.A.Brown@yale.edu with the following information:"